Skip to content

How to Find the Right Repair Part for Your Machine

Sourcing the right repair part should not mean three phone calls and a two-week wait. When a machine is down, every hour costs money, and the slowest part of the job is usually not fitting the component. It is working out exactly which component you need, then finding someone who has it.

This guide covers the two things that get you the right part first time: how to identify what you are actually looking for, and what to have ready when you ask. Get those right and a repair that drags on for a fortnight becomes a next-day delivery.

WHY THE RIGHT PART IS HARDER TO FIND THAN IT SHOULD BE

A single earthmoving machine is built from thousands of components, and the same model can carry different parts depending on its serial number, build year and the options it left the factory with. Two excavators that look identical on site can need different pumps, seals or sensors.

That is why ordering on a description alone, or on a photo, so often goes wrong. The part that arrives looks close but does not quite fit, and you are back to square one with the machine still parked. The way to avoid it is to identify the part precisely before you order, and there are three reliable routes to doing that.

THREE WAYS TO IDENTIFY THE PART YOU NEED

1. By the part number.
The most accurate route. If the old component carries a legible part number, or you can find it in the machine’s parts manual, that number pins down exactly what you need. Original equipment part numbers cross-reference directly to their quality aftermarket equivalents, so an OEM number is all we need to match the right part
from the ITR range.

2. By machine make, model and serial number.
If the part number has worn away or you cannot get to it, the machine’s identity does the same job. The make, the full model, and crucially the serial number let us look up the correct component for your exact build. The serial number matters more than people expect, because it is what separates one build variant from another.

3. By describing the part and the symptom.
Sometimes you have neither number to hand. A clear description of the component, where it sits on the machine and what has failed, combined with the machine details, is usually enough for an experienced parts team to identify it. This is where talking to people who know the machines earns its keep.

WHAT TO HAVE READY WHEN YOU ASK

You will get to the right part fastest if you have these to hand before you call or enquire:

– Machine make and model, in full.
– Serial number of the machine, or the PIN plate.
– The old part number if it is legible, or the number from the parts book.
– A photo of the failed component in place, if you are not sure what it is.
– What has gone wrong, in plain terms, as the symptom often points to the part.

Even two or three of these will usually get you there. The more precise the information, the less back and forth, and the sooner the part is on its way.

WHAT MST STOCKS

Behind the identification sits the range, and this is where sourcing from the right supplier changes the timescale. MST offers the world’s largest range of ITR repair parts, with over 50,000 products covering the machines most common on UK sites: Caterpillar, Komatsu, Volvo, Hitachi and JCB.

The range runs well beyond the obvious wear items:

  • Engine and cooling parts, gaskets and gasket kits.
  • Transmission and driveline parts, friction discs and plates, gears and gear rings, driveshafts and universal joints.
  • Hydraulics, pumps, turbos, piston and rod groups, seals and seal kits.
  • Steering and frame components, steering links and sockets, tie rods, equalizer bars, bogies and pins, caps and trunnions.
  • Pins and bushings, bearings (cups and cones), sensors and solenoids, air and oil filters, and electrical and cab parts.

Every ITR part is designed in Italy and manufactured under full quality control from raw material to finished component, with over 20 years behind it fitting parts to machines worldwide. It is genuine quality at an aftermarket price, not a cheap copy that fails early.

Alongside repair parts, MST is also the UK’s leading supplier of undercarriage components and holds the UK’s largest range of cast bucket wear parts, so the undercarriage, the wear parts and the smaller components that keep everything running can all come from one place.

GETTING THE RIGHT PART, FIRST TIME

You do not need to identify every component yourself. You need your machine details and a quick conversation, and the team does the rest.

HAVE THIS READY AND WE WILL DO THE REST

Machine make, model and serial number, the old part number if you have it, and a photo of what has failed. With that in hand, MST holds stock across four UK depots — Durham, Glasgow, Birmingham and Guildford — backed by the ITR global network for anything not held locally, so even unusual parts are sourced quickly rather than left on back order.

Machine down, or planning ahead? See the repair parts range or call the team on 0191 410 5311 with your machine make, model and serial number, and we will find the right part and get it moving. Fifty years of getting the right part, first time.